How to install Roman rod

Measurement and pricing of curtain rod and curtain track:

1. To make a wall is to measure the width of the whole wall (1 cm on one side), and the size of the head, according to the meter.

2. For Windows, the curtain rod (including the head) should be 50-80 cm wider than the window (25-40 cm on one side), and the size of the head should be priced according to meters. The curtains should not be stacked so that they block the Windows.

3. The measurement of the general track (including the curved track) is to measure where it is installed, and it can be sawed off when it is long and cannot be connected when it is short.

Measuring and pricing of roller curtain:

1. Installed in the window frame, measure the width inside and then buckle 0.5 cm, the height is 2 meters high, and the price is measured by square meters.

2. Installed outside the frame, it should be 20 cm wider than the window frame (10 cm on one side), and the height should be 2 meters high, priced according to square meters.

(The size of the roller shutter is 4 cm with the controller on both sides)

Bamboo blinds measurement and pricing:

1. Installed in the window frame (1 cm off the actual width of the window frame), the height is not buckled. According to the actual area of the curtain in square meters.

2. Installed outside the frame, the actual width and height of the window frame of the actual size plus 20 cm, (up and down about 10 cm); Pricing is the same as above.

Installation of curtain rod and measurement and calculation of curtain fabric:

The material and size of the curtain fabric depends on the size of the curtain rod or curtain track and the installation location of the curtain rod or curtain track.

1. Calculation of material width of curtain fabric

Under normal circumstances, the material width of the curtain fabric is 2 times the width (length) of the curtain rod (track), and the ratio is 2:1. Because the curtain fabric has to be creased.

Ii. Height calculation of curtain fabric

1. Measurement and calculation of floor curtain height:

Measuring and calculating the height of curtains mounted on Roman rods

Generally, the distance from the top to the ground is reduced to 5-8 cm from the top when the curtain rod is installed (the bracket is from the top for easy installation), and then the height of the curtain rod bracket (the bracket height of the general Roman rod is about 7 cm) and 2-5 cm from the ground. The result is the height of the curtain fabric to be made.

If there are lines on the top corner, just use the distance from the bottom of the line to the ground to reduce the height of the curtain rod support (generally the height of the Roman rod support is about 7 cm), and then deduct 2-5 cm from the ground. (The distance of the line does not reach 5-8 cm from the top to make the installation inconvenient, the bracket should be a little distance from the line, to ensure that the bracket is 5-8 cm from the top, and the distance from the bracket to the line should also be deducted when calculating)

Curtain measurement and calculation of mounting track:

The track is generally the top installation, and the height of the curtain is the distance from the top to the ground. The height of the track and the distance from the ground can be deducted by 2-5 cm (if it is a curtain box, it is the distance from the top of the curtain box to the ground).

If it is side mounted, the distance from the track to the ground can be deducted from the height of the track and the distance from the ground 2-5 cm.

2. Measurement and calculation of half-cut curtain height:

Make half curtains that only cover the window's curtain height

Generally, it is 20-25 cm from the upper edge of the window to 20-25 cm from the lower edge of the window to remove the curtain rod support (about 7 cm) or the height of the track (about 3 cm).

The origin of the Roman pole:

A horizontal rod for hanging curtains, fixed horizontally above the window, a cylindrical rod with a diameter of about 2-4 cm, and the length depends on the size of the window. The two ends of the rod are gourd-shaped capitals, which play a decorative role, and are named after the style of similar ancient Roman architecture.

The Roman rod has a groove for the slide rail, the rod is set on the ring, the ring has a pulley in the slide rail movement, driving the curtain to open and close; Low noise, silent type, the upper part of the rod has a noise reduction bar, after the ring sleeve rod in the noise reduction bar above sliding.

Types of Roman rods:

According to the material, alloy coated plastic rod, aluminum alloy electrophoresis rod, solid wood rod, all steel rod, post paper rod.

Curtain rod installation:

Items needed for installation:

1. Hammer drill and matching Φ6mm drill bit, steel tape measure, pencil, Phillips screwdriver, Φ6mm plastic expansion tube, Φ4x40mm self-tapping;

Check the compatibility of the Roman rod and its decorative head, support, and hanging ring, measure the length of the Roman rod and the width of the window.